Looking for a truly modular, make it your own bed rack system for your Jeep Gladiator? Look no further. We've created the XPLOR Rack with customization front and center. With the ability to mount our carrier plates on the outside, inside and top of the rack, you can create the perfect setup for your next adventure. We went with half inch bolts for mounting to your existing factory frame rails and 3/8" carriage bolts throughout out the frame for added strength and reliability. Our powder coated racks are sandblasted, pre-treated with 4 stage iron phosphate wash with deionized water rinse. They receive a basecoat of zinc rich primer and then are shot with a top coat of black fine texture.
Our rack allows you also to run either a Halo Rack on top or the Rhino Rack Pioneer platform for additional mounting/storage options. With plenty of locations to mount lights, if you decide you need to make your own, feel free to drill into the cage and create your custom light setup.
What's included in the basic setup?
You'll receive front, middle and rear brace bars including their corresponding crossbars. Four carrier plates for exterior side mounting. Six top channel braces, perfect for mount rooftop tents or other accessories. You'll also receive a plate for mounting behind the cut-out Rebel Off Road Logo, which you can powder coat any color to match your Gladiator.
- Added Accessories
Did your Gladiator not come with factory rails? No problem, you can purchase rails as an accessory and at a much more affordable price. -
Last but not least, is the Heachache Rack. This mounts to bars directly behind your rear window and adds additional safety and protection from any of the items you've placed loose in the back of your Gladiator (remember the factory hardtop is fiberglass). It's also molle, giving you additional options for storage accessories and has a cut out for your rear sliding window.
With our new fridge mount, you won't have to drill into your brand new bed to mount a slide. Our mount bolts to the bed rails, and allows you to mount either a Dometic or ARB fridge slide elevated above your tailgate when pulled out. It also has molle for mounting first aid kits or other accessories you'll need to pull out quickly. Will have rubber stoppers on the bottom.
We've also designed a table mount that will attached underneath the top portion of our rack. This will allow you to run Lifetime tables tucked up and stored securely.
Made In The USA!
Whats Included: Three Cross Brace Bars | 6 Bed Mounts | 4 Flat Panel Carrier Plates | 6 Small Top Channel Mounts | Hardware
FLAT CARRIER PLATE
SMALLER TOP CHANNEL
WHEN PURCHASING ADDITIONAL FLAT CARRIER PLATES YOU WILL NEED 2 STANDOFF BRACKETS PER FLAT CARRIER PLATE.